Glass installation kit, Bondkits, single

The BondKits Bonding Kit is your all-in-one solution for professional-grade automotive windscreen and side window installation. This comprehensive kit includes everything you need to ensure a secure, lasting bond for your vehicle’s bonded windows.

The installation kit includes:

• 1 x Window adhesive, cartridge, 310ML, with a generous working time, with a product you can trust to deliver consistent performance and dependable results across different projects and conditions.
• 1 x Combi-stick Multi-active primer, 10ML with anti-corrosive properties, which can be used multiple times for up to 14 days, ensuring extended protection and reliability for various applications.
• 1 x Cleaning Cloth, a non-smearing glass cleaner that is also used to clean ceramic frit, coatings and polyurethane pre-applied adhesive systems.
• 1 x Abrasive Fleece

With the BondKits Bonding Kit, you can trust that every component is engineered to the highest standards, providing you with a professional-quality bond that stands the test of time. Ideal for both professional and DIY use, this kit makes windscreen bonding straightforward and reliable.

Coverage:

Normally enough for 1 side window.

Usage:

1. Protective equipment

Always use adequate protective measures when handling adhesive, such as protective gloves suitable for polyurethane adhesive. Also pay attention to the ventilation of gases released from the adhesive, i.e. possible respiratory protection.

2. Surface preparation

The adhesive surfaces are lightly roughened with a roughening pad.

The adhesive surfaces are cleaned with a cleaning cloth and the surface is allowed to dry. The surfaces must be clean, dry and free of grease, oil, dust or impurities.

The adhesive surfaces are pretreated with the included primer and the primer is allowed to dry for about 15 minutes.

3. Application

It is always recommended to wear protective gloves when applying and to apply the adhesive with a powerful battery-operated piston gun. Please note that the adhesive is more rigid when applied at low temperatures. For ease of use, it is recommended to store the product at the prevailing temperature before use. The open time of the adhesive is significantly shorter in warm and humid air.

The glass should always be glued within 15 minutes of applying the adhesive. Never glue if the surface of the applied joint has already become leathery.

To ensure a uniform layer thickness of the adhesive joint, we recommend applying the joint with a triangular cross-section. (make diagonal notches in the adhesive tip)

We recommend a maximum adhesive joint height of 15mm.

4. Removing stains

Uncured adhesive can be removed from tools and equipment with a suitable solvent. Once dried, the product can only be removed mechanically. Hands and other contaminated skin should be cleaned immediately with soap and water.

5. Drying

The adhesive dries approximately 3.5mm / 24h and the minimum drying time in the car is 2 hours. However, we always recommend the longest possible drying time in a warm room.