Primer, 30ml, 3M 58012

Primer, 3M 58012 single-phase primer, 30ml

Primer is needed to prepare the surfaces to be bonded for the actual windshield adhesive.

3M™ Low VOC Primer is suitable for use with windshield adhesives on ceramic glass edges, bare glass or metal areas. Drying time 10–15 min. Operating temperature 5–25 °C. Color black. Used with 3M primer applicator.

Yield:

Normally enough for about 5 side windows

Features:

* Black

* Easy to use with 3M primer applicator

* Dries quickly

* Operating temperature range 5–25 °C

Use:

1. Protective equipment

Always use adequate protective measures when handling adhesive, such as protective gloves suitable for polyurethane adhesive. Also consider ventilation of gases released from the adhesive, i.e. possible respiratory protection.

2. Surface preparation

Surfaces must be clean, dry and free of grease, oil, dust or contaminants.

3. Application

Shake the can for at least 30 seconds before use, ensuring that the ball in the can moves freely. Apply a thin layer of the product with an applicator to both the glass and the basket where the adhesive is to be extruded. Allow to dry for approx. 10-15 minutes.

4. Stain removal

Undried primer can be removed from tools and equipment with a suitable solvent. Once dried, the product can only be removed mechanically. Hands and other contaminated skin should be cleaned immediately with soap and water.

5. Drying

Drying time is approx. 10-15 minutes, depending on the temperature.